PAX Terminal Configuration

For the Valet Manager POS to communicate with the PAX terminals, the following settings must be configured as follows:

• TAB - Communication
  • SECTION - General
    • Primary Comm Type -LAN
  • SECTION - LAN
    • LAN Update -ON
    • DHCP -Disabled
    • Local IP - 192.168.009.049  [If there is more than 1 terminal at a location, please contact your valet manager representative to confirm the correct IP addresses.]
    • Netmask - 255.255.255.000
    • Gateway IP - 192.168.009.001
    • DNS IP - 008.008.008.008
    • Ping URL -www.google.com
    • Ping Timeout (ms)- 500
  • SECTION - Communication between ECR/POS and PAX terminal
    • Limit Length -512
    • Port -10009
    • Communication Type -Ethernet
    • UART Baudrate -9600 bps
    • Protocol Type -TCP/IP
• TAB - Industry
  • SECTION - Host Features
    • Local Duplicate Check -Enabled

We do recommend the following settings to reduce confusion between attendants and customers.

• TAB - BroadPOS
  • Time and Date Synchronization
    • TimeZone -Select terminal's actual timezone
    • Daylight Savings Time -Enable
    • Sync to Server Time -Enable
• TAB - EMV
  • SECTION - EMV Features
    • EMV Card Remove Beep -Continuous Beep
• TAB - Industry
  • SECTION - Host Features
    • Fleet Card Support -Enabled
    • Commercial Card Support -Enabled
    • FSA Support -Disabled
    • Disable Feet Card Prompts -Yes
    • Disable Commercial Card Prompts -Yes
• TAB - Misc
  • SECTION - Peripherals Features
    • Contactless Module -Internal

** For PAX Android terminals please ensure that the BroadPOS application is either pinned or set to auto-launch in AirLauncher.