1. Update static IP settings as needed on the router on Pronto Cloud Controller. Don't forget to Save the settings at the bottom of the page!
2. Connect to the router:
2A. Via Wifi
2B. Direct ethernet connection to LAN port on router
3. Go to 192.168.9.1 on a web browser
3A. You may have to ignore the safety warnings and proceed to the router's configuration page.
4. The password is the last 6 digits + colons of the MAC address of the router (ex: 55:AA:00)
5. Fill in the static settings as needed, then click Save & Reboot. This process will take several minutes, as the router will change its settings, download the new configuration, and attempt to reconnect using the new settings. DO NOT DISCONNECT OR POWER OFF ANY COMPONENTS AT THIS TIME.